Bio-Rad
Description
The HL5500PC is a high-performance Hall Effect Measurement System. It enables measurement of resistivity, carrier concentration and mobility on a wide range of semiconductors and with minimum effort in sample preparation.
The HL5500PC is designed as a modular system and the basic instrument can measure sheet resistivity’s up to a few MOhm/square and Hall voltages of a few µV. Samples can have Van der Pauw, bar or bridge shaped geometries, and dual temperature measurements (at room temperature and 77k) are readily achievable.
Capabilities
- Thickness should be less than 1/15 of the peripheral length (less than 1mm), and uniform to ±1%.
- Sheet resistivity of 0.1 mΩ/square to in excess of 1 MΩ/square
- Optional to extend sheet resistivity measurements to 1011Ω/square
- Max Measurement Diameter: 25 mm
- Magnet: Permanent with field reversal by magnet rotation
- Support for van der Pauw, Hall bar, and bridge samples
- Integration, delay & repeat measurement modes increase flexibility and accuracy on difficult-to-measure samples
- Easy to export data and information
Related Equipment
Location: RFM 2226
Manager: Dr. Casey Smith, casey.smith@txstate.edu
Backup: Jacob Armitage, jacob.armitage@txstate.edu
Model: Bio-Rad (Hall, Polaron)